Navigácia

Prihlásenie

Zaujímavé odkazy


D


A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z


Daylight
The distance, in the open position, between the moving and fixed tables or the platens of a hydraulic press. In the case of a multidaylight press, daylight is the distance between adjacent platens.

Debulking
Compacting of a thick laminate under moderate heat and pressure and/or vacuum to remove most of the air, to ensure seating on the tool, and to prevent wrinkles.

Delaminate
To split a laminated plastic material along the plane of its layers. Physical separation or loss of bond between laminate plies.

Denier
A numbering system for yarn and filament in which yarn number is equal to weight in grams of 9000 meters of yarn.

Direct Wound Roving
A roving made directly at the bushing that does not go through a roving process. Typical characteristics are single-end roving, coreless, 6-inch diameter centers and no catenary.

Direct-Sized Yarn
Specially formulated sizings on textile yarns that allow them to be resin compatible.

Dispersion
The degree to which the roving separates into discrete bundles after being chopped. Good dispersion is characterized by a bed of bundles that are uniform in width. Poor dispersion is characterized by a wide distribution in the widths of various bundles in the bed. Poor dispersion can cause poor wet-through and wet-out.

Doctor Roll; Doctor Bar
A device for regulating the amount of liquid material on the rollers of a spreader.

Draft
The tape or slope of the vertical surfaces of a mold designed to facilitate removal of molded parts.

Drape
A property indicating the stiffness of a product. The stiffness of a mat, for example, determines the ease of conformity to molded surfaces during initial processing.

Dry Laminate
A laminate containing insufficient resin for complete bonding of the reinforcement.

Dry Lay-Up
Construction of a laminate by the layering of preimpregnated reinforcement (partly cured resin) in a female mold or on a male mold, usually followed by bag molding or autoclave molding.

Dry Loft
Height of the bed of chopped fibers.

Dry Winding
A filament winding operation in which resin is not used.